Allen&Heath DR66 USER GUIDE - Manual (Page 32)

32 DR66 & DR128 Installer User Guide
Level Up Here, the function key has been
assigned to increment the level of the associated
input, output channel or matrix crosspoint when
pressed. Each press increases the level and the
displayed bar by a value of 5. Holding down the key
automatically scrolls the value up. A minimum
and/or maximum value may be assigned.
Level Down Here, the function key has been
assigned to decrement the level of the associated
input, output channel or matrix crosspoint when
pressed. Each press reduces the level and the
displayed bar by a value of 5. Holding down the key
automatically scrolls the value down. A minimum
and/or maximum value may be assigned.
Channel Mute The function key may be assigned
as an input or output channel mute control. The
display does not change. It is usual to assign the
associated LED as a red mute indicator in this case.
Patch Recall Here, the function key has been
assigned to recall one of the patches when pressed.
This may be a full or a partial patch. The LCD
briefly displays the recall message shown with the
name of the patch being recalled. Once recalled the
display reverts to normal showing the new number if
a partial patch recall, or a new number and name if a
full patch recall.
This example shows patch 01 ‘Daytime’ active. The
function key is then pressed and the full patch 02
‘Evening’ is recalled. The LCD is updated after
briefly displaying the recall message. This example
may be the case when staff prepare the system for
the evening functions by simply pressing one key.
Patch Select Here, pressing the function key lets
the user scroll through the available patches by
pressing the ▲ and ▼ keys. The LCD displays the
select function for two seconds after it is pressed
before reverting to normal display. If the ▲ or ▼
key is pressed during that time then the patch
number is incremented or decremented. To accept
the displayed patch press the SET► key during the
two seconds.
This example shows the display sequence when a
patch select function key is pressed. Patch 1 is
selected by scrolling using the ▲ or ▼ key and then
recalled by pressing SET►. You can access all the
available patches in this way.
Mic 1 Lev 45
█ █ █ █ ▌ _ _ _ _ _ ↑
Mic 1 Lev 45
█ █ █ █ ▌ _ _ _ _ _ ↓
01/08 Daytime
Mon 19:03:26
01/08 Daytime
Recall..Evening
02/08 Evening
Mon 19:03:30
Select
1 Daytime
02/08 Evening
Recall..Daytime
01/08 Daytime
Mon 19:03:30