Important safety instructions, Warnings, Warning – Allen&Heath DR66 USER GUIDE User Manual

Page 4

Advertising
background image

4

DR66 & DR128 Installer User Guide

Important Safety Instructions

WARNINGS

-

Read the following before proceeding:

ATTENTION: RISQUE DE CHOC ELECTRIQUE – NE PAS OUVRIR

Read instructions

:

Retain these safety and operating instructions for future reference. Heed all
warnings printed here and on the equipment. Ensure that the operating
instructions printed in this user guide are adhered to.

Removing the cover

:

Operate the unit with its top cover correctly fitted. Do not touch or tamper with
the internal power supply circuits while configuring or adjusting the internal
settings with power applied. Do not remove the internal power unit protection
cover at any time.

Power sources

:

Connect the unit to a mains power source only of the type described in this User
Guide and marked on the rear panel. Use the power cord with sealed mains plug
appropriate to your local mains supply as provided with the console. If the
provided plug does not fit into your outlet consult your agent for assistance.

Power cord routing

:

Route the power cord so that it is not likely to be walked on, stretched or pinched
by items placed upon or against it.

Grounding

:

Do not defeat the grounding and polarisation means of the power cord plug. Do
not remove or tamper with the ground connection in the power cord.

Water and moisture

:

To reduce the risk of fire or electric shock do not expose the unit to rain or
moisture or use it in damp or wet conditions. Do not place containers of liquids
on it that might spill into any openings.

Ventilation

:

Do not obstruct the ventilation slots or position the unit where the airflow required
for ventilation is impeded. If the unit is to be operated in a rack or other furniture
ensure that it is constructed to allow adequate ventilation.

Heat and vibration

:

Do not locate the unit in a place subject to excessive heat or direct sunlight, as
this could be a fire hazard. Locate the unit away from any equipment that
produces heat or causes excessive vibration.

Servicing

:

Switch off the equipment and unplug the power cord immediately if it is exposed
to moisture, spilled liquid, objects fallen into the openings, the power cord or plug
become damaged, during lightening storms, or if smoke, odour or noise is
noticed. Refer servicing to qualified technical personnel only.

Installation

:

Install the unit in accordance with the instructions printed in this User Guide.
Unauthorised changes or modifications may invalidate the warranty or legal
compliance of the unit and could void the user’s authority to operate it.

CAUTION

WARNING:

This equipment must be earthed.

WARNING:

This equipment must be installed

and configured by competent technical personnel only.

Advertising
This manual is related to the following products: