Altman Lighting Phoenix LED Profile Spot - Manual (Page 12)

Altman Lighting, Inc. 57 Alexander Street., Yonkers, NY 10701 1-800-4-ALTMAN
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. COPYRIGHT 2012© ALTMAN LIGHTING, INC/ ALL RIGHTS RESERVED
1/24/14 rev:C
12
General Maintenance
In order to insure longevity of your fixture, regular cleaning is necessary. The lens and fan
must be cleaned periodically to allow proper function of the fixture. Do not use alcohol or any
other solvent with chemicals to clean the lens. When cleaning your lens, use a clean soft lint
free cloth with damp with water. Do not use any hard materials to wipe the lens. Maintenance
and cleaning of your fixture depends on the frequency of use and the environmental conditions
your fixture is kept in. Make sure the fan is kept free of lint and dust to allow proper air flow.
To avoid damage to the shell of your fixture do not use alcohol or other organic solvents.
Troubleshooting
Problem Action
Unable to start / Power Check the power line connection between the fixture and electric source.
Check DMX Address.
Check the fan and make sure there is no dust or debris is blocking the
Check the Lifetime of the LEDs, make sure the lenses are clean.
Data Signal Problems
Check Data lines and make sure all cables are in good condition.
Check the termination points.
Intensity of the beam is dim
Fixture Power Intermittence
Imperfections in the beam Make sure the lens is clean and free of cracks
Beam distortion Make sure the lens is clean and free of cracks