Altman Lighting Phoenix LED Profile Spot - Manual (Page 3)

Altman Lighting, Inc. 57 Alexander Street., Yonkers, NY 10701 1-800-4-ALTMAN
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. COPYRIGHT 2012© ALTMAN LIGHTING, INC/ ALL RIGHTS RESERVED
1/24/14 rev:C
3
Phoenix
Series
LED Profile Spot
INTRODUCTION
Congratulations on purchasing one of the finest
lighting instruments available today! Before
using your Phoenix LED Profile Spot, be sure to
read all of the instructions in this manual.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE,
ELECTRICAL SHOCK, OR INJURY TO PERSONS FOR
SPECTRA SERIES LED LIGHTING FIXTURES.
WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS, FOLLOW THESE
IMPORTANT SAFETY INSTRUCTIONS:
1. Turn off, unplug power, and allow fixture to cool before
cleaning or servicing.
2. Ensure fixture is properly grounded.
3. Ensure that ventilation slots are not obstructed.
4. Do not look directly at lighted LEDs.
5. Keep away from flammable materials.
6. No user serviceable parts inside. Replace entire light
engine assembly if necessary.
7. Do not touch the LEDs at any time. Use a soft lint free
cloth the clean lens. Do not use solvents to clean. Use
cloth dampened with water. Allow to dry completely
before turning fixture on again.
8. Do not operate the unit with missing or damaged lens.
9. Do not expose unit to rain or use in damp or wet
locations.
10. Allow for adequate ventilation with a minimum of 20”
from the adjacent surface.
11. Be sure the cooling fans are functioning properly and
no ventilation slots are blocked with debris.
12. Before installation, make sure the Voltage being used
is consistent with fixture requirements.
13. Maximum units to daisy chain power is no more than 4
fixtures.
SAFETY INSTRUCTIONS
Input Voltage: 90~240V AC, 50/60Hz
Rated Power: 250W @220V
Beam Angle: 19°, 26°, 36° and 50°
Data Controls: DMX 512 and RDM control protocol
Additional Functions: Display fixture service time,
LCD back light time optional, Display auto reverse function
SHUTTER ASSEMBLY
ROTATION LOCKING KNOB
YOKE
T-HANDLE (2)
FOCUS LOCKING KNOB
DROP IN IRIS SLOT
COLOR FRAME /
ACCESSORY COVER
COLOR FRAME /
ACCESSORY COVER
LENS TUBE
SHUTTER ASSEMBLY
LIGHT ENGINE ASSEMBLY
SHUTTER LOCKING
LEVER