Axcess Activator Installation Guide - Manual (Page 11)

Activator Installation Manual
© 202, AXCESS Inc. 750.001.006 R0003 11
GND +24VDC
POWER
RS-232
DATA TX CNTL
- +
Back Panel
RS-232
Cable
Open
Com Port
Figure 4 Connecting computer to the Activator
To communicate via Windows HyperTerminal
1: From the Start button on the computer’s desktop, select Programs
> Accessories > Communications > HyperTerminal.
2: In the Explorer window that appears, double-click the
Hypertrm.exe icon to launch the HyperTerminal application.
3: In the Connection Description dialog, enter any name of the
connection and select the first icon in the Icon selection box; then
click OK (Figure 5) .
Figure 5 Enter a name for the connection
4: Select the com port to which the Activator is connected from the
Connect Using drop-down list; then click OK (Figure 6).