Axcess Activator Installation Guide - Manual (Page 15)

Activator Installation Manual
© 202, AXCESS Inc. 750.001.006 R0003 15
Serial Port Commands
There are commands available to list a help screen and change
the baud rate of the Activator’s serial port.
Receiving Help
Typing a question mark “
?” displays a help screen listing all
commands available for the Activator:
c = 4800cps
d = 9600cps
e = 19200cps
<Num>! = ID
Changing the Baud Rate
To connect the Activator to another serial device, you can
change the Activator’s baud rate to match the baud rate of the
device by entering one of the following commands:
Baud Rate Command
4800 c
9600 d
19200 E (Default baud rate)
NOTE After you have set the baud rate, you will need to adjust the
port settings of the serial device.