Online manual not for resale purposes – BLITZ DCII Meters User Manual

Page 2

Advertising

Notice

Please read and understand this manual before using this product. This manual assumes that you are familiar with
typical automotive systems, basic service and repair operations. You should also have the know how to use
automotive tools and equipment which are necessary to safely and efficiently perform service operations to a
vehicle. Use a factory service manual as a reference. DO NOT attempt to carry out these operations unless you are
competent and these assumptions are correct. Many of the procedures or operations will refer to the factory manual.
Follow all safety precautions described in the factory service manual for the vehicle you are working on to reduce
the possibility of injury to yourself and or others also to avoid the possibility of damage to the vehicle or to render it
unsafe. Read this manual to understand how this product works then install it only after you have full read and
understand this entire manual. Do not attempt to install or use this product with out through knowledge of how the
product works. Please contact Blitz NA or your authorized dealer if there are any questions regarding this product
or of its installation. Blitz NA has the right to update, change, modify, discontinue or supersede the product without
any prior notice.

WARNING

Ignoring these indications may cause serious injuries or even death, also damage to the product or the vehicle may
result causing malfunction. Please read and fully understand this section. Do not operate this product while driving
your vehicle. Make sure after installing the product or any of its parts, it does not interfere with your driving or anything
related to the vehicles day to day use. Please strap or mount any loose parts or wires securely. Blitz NA
will not be responsible for any damages done or caused to the product or the vehicle. The buyer of this product will
take full responsibility for any damages. Do not: drop, misuse, and abuse, alter, take apart or modify this product in
any way, if it has been the warranty will be void. Please confirm you have all parts that came in the original package
without any prior damages, if any parts are missing or damaged please contact your authorized dealer at the place
of purchase. If you notice any strange smells or noises coming from the product, please stop use immediately and
consult your place of purchase/authorized dealer. Due to the fact the vehicle will need to be on and running to verify the
product is working and installed correctly, always perform the installation in a well ventilated area. Bad ventilation may
cause serious injuries, harm or even death. Please do not install any of the parts in any area where it may come
in contact with any type of water/liquid or any type of high heat. This product is designed for 12V DC use only. Do not
attempt to use on 12/24V vehicle or 24V vehicles.

Features of the Racing Meter DC II

Super lightweight compact/low profile design
Weights only 1.34oz and is .8inch thick
Due to size it can be installed virtually anywhere in the vehicle (does not require a lot of depth)
64mm diameter with 60mm area easy to read face
Long life LED illumination with user adjustable brightness (high visibility LED indicators (red, green, yellow)
State of the art microprocessor circuitry
Revolutionary stepping motor technology (1st company to use stepping motor it in a gauge)
Accurate real time monitoring with peak-hold/ warning/recall and record/play back functions
Simple easy to hook-up design (gauges only need to be plugged into LIVE UNIT II/all sensors and harness
plug into the LIVE UNIT II)
Daisy chain simultaneous display function (link all meters for 1 touch operation in record/playback mode)
It is possible to daisy chain up to 6 gauges with the use of 2 live units (3 gauges each)
One live unit can support 3 DC II gauges
Boost sensor built into Live Unit II not additional boost sensor is necessary
The boost gauge can read in real time, delay and peak hold (1 sec)
Dual input temperature meter (Ex. Water/Oil/Trans/Air) Additional sensor is necessary to measure
2 inputs (part #19210)
For the SPEED/POWER gauge user can switch back and forth between speed and power measurements by
pushing 1 button (On certain vehicles it can also cancel the speed limiter).
The EGT/RPM gauge can switch back and forth between exhaust gas temperature and engine rpm
measurements by pushing 1 button
Power and RPM gauge can display in real time and pass/hold
It is possible to utilize high visibility LED indicators (for warning/RPM) with the LIVE UNIT II
(available separately Part #19291)
It is possible to use DC II boost, temp, pressure gauges with LIVE UNIT I (not all functions will work)

WARNING: All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No part of this may be reproduced,

stored in retrevial systems, or transmitted in any form or means with out prior written permission of Blitz Co., Ltd. (Japan).

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals