Online manual not for resale purposes – BLITZ Scion xB-xA Compressor System User Manual

Page 11

Advertising

4. Remove the alternator bracket as shown in
the illustration.

5. Using the

⑥

bolt (1) and #17 bracket

spacer B (1), attach #6 alternator bracket as
shown in illustration. Install the alternator
upside down. Using the

⑧

head bolt (1) and

⑮

washer (1), attach alternator to #6

Alternator Bracket.

6. Using

⑱

bolt (1) and

⑬

nut (1), attach the

alternator on bottom alternator mount.

7. After installing alternator, make sure the
A/C line does not interfere with belts. If it
does, push the A/C line forward and make
sure the alternator has enough clearance.

8. North American models will have addition
A/C lines near engine mount (not shown
here). Please adjust A/C line to clear
alternator pulley. Please find a suitable spot
where the A/C line will not interfere with the
pulleys and tie the line down with zip ties.

WARNING:
* Be sure that the alternator does not hit the front A/C line.
The motor will torque forward when under driving
conditions. Please make sure there is enough clearance
between the A/C line and alternator. Also be careful when
adjusting A/C lines, do not use tools to adjust, this might
damage the lines and cause leakages.

9. Reinstall air bag sensor.

10. Remove studs bolts from intake factory
intake manifold, as illustrated.

Alternator bracket

Stud bolt

Factory/OEM
intake Manifold

17. Bracket spacer

⑥Bolt

Alternator bracket

⑧Bolt
⑮Washer

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals