BLITZ Scion xB-xA Compressor System - Manual (Page 9)

12. Remove blow-by hose and vacuum hose
as shown in illustration.
13. Remove the bolt (1) on the dip stick
bracket. Remove dip stick.
14. Remove all harness attachments on the
intake manifold.
15. Remove intake manifold bolts (3) and
nuts (2). Remove intake manifold.
*If intake manifold is hard to remove,
remove studs bolts first.
16. Remove intake manifold studs bolts off
the cylinder head.
Vacuum hose
Blow-by hose
Oil Dip Stick
Bolt
Harness clip
Bolt
Stud bolt
）
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes