Online manual not for resale purposes – BLITZ Scion xB-xA Compressor System User Manual

Page 5

Advertising

(4) Relieving fuel pressure on fuel pump

Under Dash Fuse box

40．Switch template x1

41．Fuel control unit x１

①Flange Bolt M6×16 7ヶ

②Flange Bolt M6×35 2ヶ

③Flange Bolt M8×20 1ヶ

④Flange Bolt M8×30 2ヶ

⑤Flange Bolt M8×35 1ヶ

⑥Flange Bolt M10×25 1ヶ

⑦Flange Bolt M10×35 1ヶ

⑧Big Bolt M10×55 3ヶ

⑨Cap Bolt M6×25 2ヶ

⑩Cap Bolt M8×20 2ヶ

⑪Cap Bolt M8×30 2ヶ

⑫Flange Nut M6 6ヶ

⑬Flange Nut M8 2ヶ

⑭Flange Nut M10 2ヶ

⑮Washer M10 3ヶ

⑰Stud Bolt M8 3ヶ

⑯Stud Bolt M6 5ヶ

⑱Flange Bolt M8×45 1ヶ

(1) Locate and remove the fuse box panel
under dash. (It is located under the dash on
the drivers side). Locate and remove fuel
pump relay. It is the blue relay on the right
hand side above the fuses

(2) Start motor and let the engine use up the
excess fuel pressure (motor will stop in 10-15
sec due to no fuel pressure). Turn Ignition off
after the car has stopped.

(3) Remove the negative terminal of the
battery.

(4) Reinstall fuel pump relay.

* As for circuit opening relay it is under the
right of the driver's seat handle.

Fuel Pump
relay

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals