BLITZ Throttle Controller - Manual (Page 2)

Please read carefully and understand the contents.
・This product improves the body accelerating sensation but does not increase horse power output. It controls the
throttle signal by opening the throttle more than it is actually pressed on the accelerator (Gas pedal).
Moreover, please be forewarned that there are differences by individuals in the perceived accelerating sensation.
・Notes on “how to use this product”and “installation procedures”are explained in detail in this manual.
・Blitz Co., Ltd will not be reponsible of any breakage and malfunctions caused in by installing this products to a vehicle
already that has been installed with a third party’s product(s) and (or) to a reconstructed (modified) vehicle.
・Blitz Co., Ltd will not be reponsible of any breakage, malfunction and liabilities caused by wrong installation and usage.
・This product and its accessories may be changed without announcements for improvements.
・Install this rpoduct at a well-ventilated area.
Ignoring this indication may cause a fire and (or) an explosion.
・Install this product and its parts firmly at a secured place that would not be of any interference
while driving.
Ignoring this indication would cause an accident.
・This product is designed to work on a 12V DC, and the ground is designed to be the chassis fot the car.
It would cause a fire if this product is installed on a vehicle not powered by a 12V DC.
・Disconnect the harness’s connectors from the harness it selt. DO NOT pull from the harness.
It would cause a fire by a short circuit, breakage of electronic part(s) and (or) burn(s). Moreover, it would
cause some malfunction(s) to this product.
・Discontinue utilizing this product and contact us or our retailers if you notice some irregular noise
and (or) odor from this product.
Disregarding this (these) symptom(s), it would cause a fire, electrocution and (or) breakage of
electronic part(s).
・DO NOT operate this product while driving.
It would cause an accident.
・DO NOT damage any wiring(s) and (or) piping(s) from the engine room while installing this product.
It would cause a fire by a shor circuit, breakage to the engine, vehicle and (or) to the electronic part(s).
Insulate any unnecessary wiring(s) at the time of the installation.
Ignoring these indications may cause serious injuries or even death to the individual and (or) to a third
party.
DANGER
CAUTION
Ignoring these indications may cause serious injuries or injuries to the individual and (or) to a third party.
Ignoring these indications may cause injuries or minor injuries to the individual and (or) to a third
party. It may also cause malfunctions and breakages to the product and (or) to the vehicle.
ATTENTION
In order to use the product safely, please read the “SAFETY NOTICE” thoroughly.
Explanation of displayed terms.
－ Safety Notice －
CAUTION
Ignoring these indications may cause serious injuries of injuties to the individual and (or) to a third party.
2