BLITZ Throttle Controller - Manual (Page 3)

・About the LCD screen.
The LCD screen may seem dark or distorted if seen through polarized sunglasses.
・Ask for a professional or a technician to perform the installation of this product.
The individual performing this installation must have technical skills and knowledge to perform this installation.
・Do not drop or insert extreme force to the product while installing it.
It would cause malfunctions.
・Does not heat the LCD screen over 60 degrees Celsius (140 degrees Fahrenheit) for a long period.
It would cause the LCD screen to go black.
・Do not misuse, abuse, alter, take apart and (or) modify this product in any way.
It would cause an accident, fire, electrocution, and breakage and (or) burn the electronic parts. If any of the above indications are
executed, the warranty of the product will be voided.
・Do not install this product at a location where it could get wet and (or) highly heated.
It would cause an electrocution, fire, breakage and (or) burns to the electronic components.
・Do not install this product while the engine and its components are hot; wait until they are fully cooled.
It would cause burn(s) to you or to a third party if the engine, radiator, and the exhaust system were still hot.
・Please perform regular maintenance and be extra cautious.
This product's durability and components are thoroughly tested; however, depending on the vehicle's driven condition and (or)
climate, the durability may decrease.
・Do not throw away the original detached components from the vehicle. Please keep the components at a secured location.
We are not liable from any damages caused to the components while installing it. Please be extra careful through the installation.
・Use the right tools to tighten the nuts and bolts.
It will damage the threads if you over tighten it or by using the wrong tools.
・This product has been designed and tested on vehicles with manufacturer's original components.
It would cause malfunctions to the product or vehicle if you have already installed a third party's product(s).
・Do not operate this product while driving.
It would cause an accident.
・Install the controller and the main unit where it does not interfere with the driving.
Be extra careful with the wiring at the accelerator sensor since it may cause engine failure or interfere the operation of the accelerator.
・This product is made for a purpose to control the stock electronic throttle. Therefore, there is a possibility of a fatal accident, damage
and (or) malfunction to the vehicle if the usage and installation is done incorrectly.
Please ask a professional or a technician with knowledge when performing the installation and wiring of this product.
・Discontinue utilizing this product immediately and contact a specialist to inspect and perform maintenance if you notice some
irregular vibration, noise and (or) odor from this product and (or) from the vehicle while driving.
It is very dangerous if you perform any repairs yourself. Please ask a professional with knowledge in performing any repairs.
・Ask a professional for an inspection or repair if you in a case the performance of the vehicle or product feels faulty.
There is a possibility that could lead to an unexpected trouble or an accident if driven without any action.
・Do not misuse, alter, take apart and (or) modify this product in any way.
Please be forewarned that Blitz Co., Ltd will not be liable in any circumstance(s) since it would not just cause an accident that results in
vehicle damage(s); but can also cause death.
CAUTION
Ignoring these indications may cause serious injuries of injuries to the individual and (or) to a third party.
Ignoring these indications may cause injuries or minor injuries to the individual and (or) to a third
party. It may also cause malfunctions and breakages to the product and (or) to the vehicle.
ATTENTION
3