C.B.S. Scientific SG Series - Manual (Page 31)

C.B.S.  Scientific 31 Adjustable Height Sequencer
REPLACEMENT SAFETY COVERS
20CM WIDE UNITS
33CM WIDE UNITS
Cat.# Description Cat.# Description
SG20-SC-BL Upper safety cover for Adjustable SG33-SC-BL Upper safety cover for Adjustable
SG20-SC-RD Lower safety cover for Adjustable SG33-SC-RD Lower safety cover for Adjustable
DASG20-SC-BL Upper safety cover for Dual DASG33-SC-BL Upper safety cover for Dual
DASG20-SC-RD Upper safety cover for Dual DASG33-SC-RD Lower safety cover for Dual
LOW FLUORESCENCE GLASS PLATE SETS
20CM WIDE UNITS
33CM WIDE UNITS
Cat.# Plate Dimensions (w x h) Cat.# Plate Dimensions (w x h)
LFP20-020 20cm x 22cm LFP33-020 33cm x 22cm
LFP20-030 20cm x 32cm LFP33-030 33cm x 32cm
LFP20-040A 20cm x 42cm LFP33-040A 33cm x 42cm
LFP20-050 20cm x 52cm LFP33-050 33cm x 52cm
LFP20-060 20cm x 62cm LFP33-060 33cm x 62cm
LFP20-080A 20cm x 82cm LFP33-080A 33cm x 82cm
LFP20-100 20cm x 102cm LFP33-100 33cm x 102cm
GLASS PLATE SETS
20CM WIDE UNITS
33CM WIDE UNITS
Cat.# Plate Dimensions (w x h) Cat.# Plate Dimensions (w x h)
SGP20-020 20cm x 22cm SGP33-020 33cm x 22cm
SGP20-030 20cm x 32cm SGP33-030 33cm x 32cm
SGP20-040A 20cm x 42cm SGP33-040A 33cm x 42cm
SGP20-050 20cm x 52cm SGP33-050 33cm x 52cm
SGP20-060 20cm x 62cm SGP33-060 33cm x 62cm
SGP20-080A 20cm x 82cm SGP33-080A 33cm x 82cm
SGP20-100 20cm x 102cm SGP33-100 33cm x 102cm
MICROTROUGH GLASS PLATE SETS
20CM WIDE UNITS
33CM WIDE UNITS
Cat.# Plate Dimensions (w x h) point to point Cat.# Plate Dimensions (w x h)
MTV20-0324 20cm x 32cm, 24 troughs 5.92mm MTV33-0346 33cm x 32cm, 46 troughs
MTV20-0334* 20cm x 32cm, 34 troughs 4.50mm MTV33-0362* 33cm x 32cm, 62 troughs
MTV20-0338 20cm x 32cm, 38 troughs 4.02mm MTV33-0368 33cm x 32cm, 68 troughs
MTV20-0352* 20cm x 32cm, 52 troughs 3.00mm MTV33-0394* 33cm x 32cm, 94 troughs
MTV20-0370* 20cm x 32cm, 70 troughs 2.25mm MTV33-03126* 33cm x 32cm, 126 troughs
MTV20-0424 20cm x 42cm, 24 troughs 5.92mm MTV33-0446 33cm x 42cm, 46 troughs
MTV20-0434* 20cm x 42cm, 34 troughs 4.50mm MTV33-0462* 33cm x 42cm, 62 troughs
MTV20-0438 20cm x 42cm, 38 troughs 4.02mm MTV33-0468 33cm x 42cm, 68 troughs
MTV20-0452* 20cm x 42cm, 52 troughs 3.00mm MTV33-0494* 33cm x 42cm, 94 troughs
MTV20-0470* 20cm x 42cm, 70 troughs 2.25mm MTV33-04126* 33cm x 42cm, 126 troughs
MTV20-0524 20cm x 52cm, 24 troughs 5.92mm MTV33-0546 33cm x 52cm, 46 troughs
MTV20-0534* 20cm x 52cm, 34 troughs 4.50mm MTV33-0562* 33cm x 52cm, 62 troughs
MTV20-0538 20cm x 52cm, 38 troughs 4.02mm MTV33-0568 33cm x 52cm, 68 troughs
MTV20-0552* 20cm x 52cm, 52 troughs 3.00mm MTV33-0594* 33cm x 52cm, 94 troughs
MTV20-0570* 20cm x 52cm, 70 troughs 2.25mm MTV33-05126* 33cm x 52cm, 126 troughs
MTV20-0624 20cm x 62cm, 24 troughs 5.92mm MTV33-0646 33cm x 62cm, 46 troughs
MTV20-0634* 20cm x 62cm, 34 troughs 4.50mm MTV33-0662* 33cm x 62cm, 62 troughs
MTV20-0638 20cm x 62cm, 38 troughs 4.02mm MTV33-0668 33cm x 62cm, 68 troughs
MTV20-0652* 20cm x 62cm, 52 troughs 3.00mm MTV33-0694* 33cm x 62cm, 94 troughs
MTV20-0670* 20cm x 62cm, 70 troughs 2.25mm MTV33-06126* 33cm x 62cm, 126 troughs
MTV20-0824 20cm x 82cm, 24 troughs 5.92mm MTV33-0846 33cm x 82cm, 46 troughs
MTV20-0834* 20cm x 82cm, 34 troughs 4.50mm MTV33-0862* 33cm x 82cm, 62 troughs
MTV20-0838 20cm x 82cm, 38 troughs 4.02mm MTV33-0868 33cm x 82cm, 68 troughs
MTV20-0852* 20cm x 82cm, 52 troughs 3.00mm MTV33-0894* 33cm x 82cm, 94 troughs
MTV20-0870* 20cm x 82cm, 70 troughs 2.25mm MTV33-08126* 33cm x 82cm, 126 troughs
MTV20-1024 20cm x 102cm, 24 troughs 5.92mm MTV33-1046 33cm x 102cm, 46 troughs
MTV20-1034* 20cm x 102cm, 34 troughs 4.50mm MTV33-1062* 33cm x 102cm, 62 troughs
MTV20-1038 20cm x 102cm, 38 troughs 4.02mm MTV33-1068 33cm x 102cm, 68 troughs
MTV20-1052* 20cm x 102cm, 52 troughs 3.00mm MTV33-1094* 33cm x 102cm, 94 troughs
MTV20-1070* 20cm x 102cm, 70 troughs 2.25mm MTV33-10126* 33cm x 102cm, 126 troughs
GLASS PLATE ORDERING OPTIONS:
When ordering unnotched plate sets (rubber ears are included), add a “-UN” to the end of the Cat. #. Although glass plates are
listed as sets, individual pieces can be ordered. To order a notched only plate add a “-NO” to the end of the Cat. #. To order a
back only (rectangular) plate, add a “-BO” to the end of the Cat. #.