Carter-Hoffmann CH900 User Manual

Page 11

Advertising
background image

11

COOKING WITH THE FOOD PROBE (CONTINUED)

Changing the Settings Mid-Cycle

1.

Settings may be changed mid-cycle. Refer to programming in-
structions on page 7.

2.

Upon completion of the cycle, settings will revert back to initial set-
points.


Viewing Actual Temperatures
Press and hold “VIEW ACTUAL TEMP” button.

-If cabinet it in COOK mode, temperature will appear in the

“COOK”

display

-If cabinet is in the HOLD mode, temperature will appear in the

“HOLD” display


To View Elapsed Cook Time When Cooking with the Probe
Press and hold the “VIEW ACTUAL TEMP” button

-The display will read the product temperature

-After 2 more seconds, the display will show the elapsed time

of the current cook cycle

The display will toggle between the product temperature and the
elapsed time at two second intervals until the button is released.


Factory default setpoints:
- cook: 325ºF
- hold: 200ºF
- timer: 1 hour

Operating ranges:
- cook temp: 100ºF-325ºF
- hold temp: 100ºF-200ºF
- timer:10 min. -18 hours

CAUTION:
HOT SURFACE

Inner surfaces of the unit
will be very hot during and
after operation.

Avoid touching the cabinet
when loading or removing
product.

CAUTION:
STEAM HAZARD

This unit produces steam,
use caution when cleaning
or opening the doors.

To avoid damage to the
electrical components, do
not unplug cabinet while
cooling fans are operating.

CAUTION:

WARNING:
HIGH CONTROL COMPARTMENT TEMPERATURE

If the temperature in the control compartment exceeds safe operating limits, an audible alarm will
sound and the TIME display will scroll “CALL CUSt SErV”. Should this condition occur, turn off and
unplug the cabinet and then call for service. Prolonged operation of the cabinet in this condition WILL
result in electrical component failures.

Advertising
This manual is related to the following products: