chiliGREEN D620S U - Manual (Page 94)

Advanced Controls
Display Options 3 - 11
3
Switching/Enabling Displays (Keyboard Toggle)
To simply switch display devices, or enable other devices, with the
Fn + LCD/CRT (F7) toggle do the following:
1. Plug the CRT or TV into the appropriate port.
2. Press and hold the Fn key, while simultaneously pressing the
F7 key.
3. You may toggle through the options to display the LCD only, the
LCD and the external display together, and the external display
alone (make sure you allow time for the screens to refresh as
you toggle through).
Note: If you only use the keyboard toggle to switch through the dis-
play options you will not have the all the configuration options avail-
able to you. If you want to use the options listed in “Display
Options” on page 3 - 10 then use the driver control panel to config-
ure the settings as per “Switching/Enabling Displays (Driver Con-
trols)” on page 3 - 12.