chiliGREEN D620S U - Manual (Page 97)

Advanced Controls
3 - 14 Attaching a Monitor (CRT)
3
Attaching a Monitor (CRT)
If you prefer to use a monitor (CRT) you may change the vertical re-
fresh rate from the following control panel:

Vertical Refresh Rate
The vertical refresh rate
of your CRT is impor-
tant. If it is too low and/
or you’re using fluores-
cent lighting, the screen
will appear to flicker. To
reduce flickering on a
CRT, use faster refresh
rates (we recommend a
refresh rate of 72Hz or
more). But first check
your monitor’s docu-
mentation to make sure
it can support the rates
listed by the video driv-
er. The default refresh
rate for VGA monitors
(without drivers) is
60Hz.
Figure 3 - 6
Monitor
Properties