chiliGREEN D620S U - Manual (Page 106)

Advanced Controls
Enabling Power Options 3 - 23
3
Configuring the Power Button
The Power button may be set to send the computer in to either Stand-
by or Hibernate modes (Figure 3 - 12). If you are running on battery
power; in Standby mode the LED
will blink green, in Hiber-
nate mode the LED will be off. If you are in a power saving mode
set to save power through individual components (e.g. hard disk,
monitor), the LED will remain green.

Suspend/Resume
Button
You may also config-
ure the Suspend/
Resume button (F4)
from the menu illustrat-
ed in Figure 3 - 12. In
Windows this button is
referred to as the
Sleep button.
Figure 3 - 12
Power Options
(Advanced -
Power Buttons)
Power Button Suspend/Resume(Sleep)Button