chiliGREEN M665JE - Manual (Page 19)

Recording Audio - 13
Concise User’s Guide
English
Recording Audio
The audio record hot key button allows you to record audio from either the built-in microphone, or from a micro-
phone connected to the microphone-in jack. To record on the computer, setup the audio recording options in Windows
as follows (see
Figure 4 on page 14 ).
1. Click Start, point to Settings and click Control Panel (or just click Control Panel).
2. Double-click Sounds & Audio Devices (icon) - in the Sounds, Speech, and Audio Devices category.
3. Click Advanced in the Volume > Device volume tab.
4. Click Options and scroll down and click Properties.
5. Select Realtek HD Audio input from the Mixer device menu.
6. Make sure the Mic Volume (check box) is checked, then click OK.
7. Boost the volume in the Recording section (in the Recording Control menu) as high as it will go.
8. Close the Recording Control window, and then click OK.
9. Press the audio record hot key button to begin the recording process (the record icon will flash in the top left of the
screen).
10. Press the audio record hot key button again to stop the recording process (the record icon will disappear from the top left
of the screen).
11. The recorded audio file (in .wav format) will appear in the Shared Documents > Wav folder in My Computer.
12. Double-click the file to playback the recorded audio.