CiDRA SONARtrac HD GVF-100 - Manual (Page 131)

Copyright © 2006 CiDRA Corporation Page H-1
20675-02 Rev 01
Appendix H SPARE PARTS LIST
The following is a list of commonly spared parts for SONARtrac
TM
systems. Contact
CiDRA Customer Support for items not found on this list, and for price and availability.
Kit Part
Number Title Description
S-20170-01 Kit, Spare Fiberglass
Cover Bolts Replacement set of 13 stainless steel bolts (tin plated), washers, lock-
washers and lock-nuts used to on fiberglass cover assemblies
S-20352-TAB Spare Band Kit,
Stainless Steel Cover Replacement stainless steel bands and buckles used to secure the boot
gasket on stainless steel cover assemblies. The –TAB designates the
cover (pipe) size. Example, S-20352-20 is replacement bands and
buckles for a 20-inch cover. Specify cover size when ordering.
S-20574-TAB Fiberglass Cover
Replacement Seals
Replacement EPTFE seals used on fiberglass cover assemblies. The S-
20574-08-02 is used on fiberglass covers 8-inch to 2-inch size. The S-
20574-16-10 is used on fiberglass covers 16-inch to 10-inch size.
S-20592-TAB Spare Sensor Band
Tension Screw and
Spring Set
Replacement set of 9 ultra coated screws, stop washers, spring washers
and retaining rings; hex power bit; spiral tap (used to clean / chase screw
hole threads) used on sensor bands.
S-20592-01 is used on P/N 20380-ALL SIZE sensor bands;
S-20592-02 is used on P/N 20409-ALL SIZE sensor bands
S-20592-06 is used on P/N 20690-ALL SIZE sensor bands without
compliant sheet
S-20292-07 is used on P/N 20690-ALL SIZE sensor bands with compliant
sheet
Contact CiDRA Customer Support for all other sensor bands or with
questions
S-20618-TAB Spare Sensor Band
Screw Gap Gauge
and Sensor Band
Shorting Plug
Replacement spring gap gauge and sensor band shorting plug.
S-20618-01 contains spring gap gauge for use on sensor band P/N
20380-ALL: SIZES
S-20618-02 contains spring gap gauge for use on sensor band P/N
20409-ALL: SIZES
S-20618-03 contains a spring gap gauge for use on sensor band P/N
20690-ALL SIZES and P/N 20686-ALL SIZES
Contact CiDRA Customer Support for all other sensor bands or with
questions
S-20621-01 Spare Hardware and
Gasket Replacement
Kit, Stainless Steel
Cover Replacement stainless steel cover flange gaskets, spacers, cover bolt /
washer / nut sets, splice protector plates and joining compound.
S-20714-TAB Spare Kit, Electronics
Access Cover Screw
and Washer
Assembly Replacement self sealing screws with viton o-rings and retaining washers
for use on the electronics access cover.