CiDRA Sonar Process Monitoring System - Manual (Page 7)

20909-01C Rev 04 Page 1-1
1
SCOPE
This Class I, Zone 2 explosive gas location safety supplement
includes the information mandated by EN60079-0:2006 and EN60079-
15:2005 for the ATEX Zone 2 certification of either of the following
sets of equipment:
1) System comprised of Transmitter TB8-xx-xx-xx-03 with Sensor
Head SH-xxx-xx-xA-xxx-03, or,
2) Transmitter TB8-xx-xx-xx-04 with separately certified sensor
head (see appropriate separate manual for the separately
certified Sensor Head).
(where “x” in the above markings can be any character).
This supplementary manual is to be read first, but used in conjunction
with the main Process Monitoring System Installation and Startup
Manual that contains more specific instructions for installation and
operation. In the event of a conflict between the safety instructions of
this manual and those of the main manual, the instructions of this
manual take precedence.
Note: This is a UL/DEMKO controlled document.