BT DF60 - Manual (Page 25)

When you have entered the code you will hear
a long tone to confirm that you are in remote
access mode.
Using your Touch Tone keypad:
• Press 1 and any messages will be
played back.
• Press 2 and you can re-record your
outgoing message (OGM).
• Press 3 to switch to Answering Machine
(TAD) mode on.
• Press 4 to playback any recorded memos.
• Press 5 to record a memo.
• Press 6 to switch to Answering Machine
(TAD) mode off.
• Press 8 to automatically delete the message
you are listening to.
• Press 0 to exit from remote control mode or
to stop the current activity.
22
Using the answering
machine
To set the Remote Access Facility
You can operate the answering machine from
another telephone using the Remote Access
Facility. This is useful if you are on holiday or
away on business and you want to play back
messages and memos.
• Press the TAD and ᮤᮤ buttons and the
display will show: REMOTE TAD: OFF?
• Change the display to ON by pressing the
NO button. The display shows: REMOTE
TAD: ON?
• Press the YES button and the display shows:
PASSWORD: 0000
• Enter a 4 number code using the keypad.
• Press the YES button to confirm your entry.
• Press the STOP/CLEAR button.
Display shows:
TAD FUNCTION
• Press the STOP/CLEAR button to return to
standby mode.
Using the Remote Access Facility
When the Remote Access Facility is set to
ON you can operate the answer machine
from any Touch Tone telephone. After dialling
your number press the
✱
button twice
during or after your outgoing message, the
answer machine stops and waits for your 4
number code.
For your code make it an easy-to-remember
number, eg Birthdays, house numbers etc. Using
your confidential code, only you will be able to
operate the answering machine from an outside
location, using any TouchTone telephone.
If your DF60’s answer machine does not respond
you may need to press the
✱
button again.