BT DF60 - Manual (Page 29)

26
Using the fax machine
Setting the fax monitor
This lets you monitor the progress of a fax call
via your DF60’s in-built speaker.
Your DF60 is supplied with this function
switched OFF. We recommend that you keep
this function OFF at first and switch it ON later
should you need it.
With the fax monitor switched to OFF you will
hear fax tones during incoming calls only until
your DF60 begins to receive the fax. You will
also hear fax tones during an outgoing call up
until the call is answered.
With the fax monitor switched to ON you will
hear fax tones during incoming and outgoing
calls up to the point where the document
begins to be sent or received, between pages
and at the end of a call.
To switch the fax monitor on
• Press the FUNCTION button until SET
OPTIONS? is displayed.
• Press the YES button and display shows:
DIAL MODE?
• Press the NO button until display shows:
FAX MONITOR?
• Press the YES button and display shows:
FAX MONITOR: OFF?
• Press the NO button to switch betweeen OFF
and ON .
• Press the NO button to confirm your
selection.
Polling
This allows another fax machine to retrieve a
document from your DF60 or for your DF60 to
retrieve a document from another fax machine
at a time that’s convenient to them.
To set-up a fax document to be polled by
another machine.
• Load the document
• Press the POLL button, display shows:
POLLING?
• Press the NO button, display shows:
POLLED?
• Press the YES button, display shows:
POLLED SET.
• Your fax will then be sent when another fax
machine calls your DF60
• To cancel the POLLED settings, press
the STOP/CLEAR button.