BT DF60 - Manual (Page 28)

• Press the YES button and the display shows:
TIME: 00.00
• Enter the time you wish the document to be
sent, using the key pad numbers and the
ᮤ ᮣ buttons. The time must be entered
using the 24 hour clock.
• Press the YES button and the display
changes to:
PHONE :
• Enter the Fax number you wish the
document to be sent to by using the key pad,
or the pre-set One-touch or Speed Dial
numbers if the number is stored in your
DF60’s memory.
• Press the YES button, a tone will sound to
confirm your setting and the display shows :
DELAYED SET and the time you have set the
document to be sent . If necessary change
the RESOLUTION and CONTRAST to suit
the document you are sending.
Your DF60 will now send your fax at the time
you have specified.
Using the fax machine
25
If the document is ejected before sending, the
DELAYED
setting is automatically cleared.
Adjusting the resolution and
contrast
You can choose different settings when
copying or sending a document.
Your document must be loaded before starting
this function.
• Press the RESOLUTION button three times
to view the options. For documents with fine
detail, choose the FINE setting.
For documents with pictures, choose
PICTURE
setting and for a normal
document choose STD.
• Press the CONTRAST button three times to
view the options. You can choose LIGHT,
NORMAL
or DARK. For light documents in
pencil or thin print quality select the LIGHT
setting. For documents with a dark
background, select the DARK setting.
Your DF60 returns to STD/NORMAL after
each document has been copied or sent.
If you have selected PICTURE resolution, you
cannot set the contrast to LIGHT or DARK.
These settings only apply to a document being
sent or copied.
If delayed sending is already set the display
shows:
CANCEL? followed by the fax number to be
dialled.
•
Press the YES button to cancel sending,
display shows:
DOCUMENT SET
You must now begin programming the delayed
send function again.