COATS ProGuard Leverless Plus Tire Changer - Manual (Page 12)

Operation Manual - COATS PRO GUARD PLUS - 12
N
L
M
The pedal control (L) is used to move the vertical arm
out of the working position, once the tire has been de-
mounted, or in the working position while mounting and
demounting the tire.
The pedal control (M) is used to turn the spindle fl ange
clockwise, (low and rotation mode) and counter-clockwise
(low rotation mode).
The pedal control (N) is used to lift the tire off the ground to clamp it on the
fl ange and vice versa to lower it back down to the ground after mounting
it. Press the pedal to raise the lift, push the pedal upwards to lower the lift.
7.0_DESCRIPTION OF THE MACHINE’S CONTROLS
O
The pedal control (O) is used to infl ate the tire. Connect the infl ation hose to the
pneumatic valve and press the pedal to infl ate; to reduce the tire’s pressure, press
the button at the side of the gauge. Before infl ating, read the instruction ma-
nual of the vehicle fi rst to fi nd out the recommended pressure of the tires.