COATS ProGuard Leverless Plus Tire Changer - Manual (Page 15)

Operation Manual - COATS PRO GUARD PLUS - 15
8.0_TRANSPORT
- The tire changer is to be transported in its original packaging and kept in the position indicated on the actual
packaging.
- The packed machine is to be moved using a forklift truck of suitable load-bearing capacity, inserting the forks in
the points indicated in the drawing below (fi g. 1).
9.0_UNPACKING
Remove the cardboard and the securing screws, then take the machine off the original pallet.
Check the integrity of the equipment, making sure no parts are visibly damaged or missing, referring to the illu-
stration on page 11.
In the case of doubt, do not use the machine but contact your dealer.
Packaging elements must not be left at children’s reach because they could be dangerous. Put the packaging
material in dedicated waste collection areas if they are pollutant or non-biodegradable.
NOTE: Exposed parts are covered with special rust inhibiting oil, possible traces of dirt are not due to negligence
but are just leftovers of this oil. Clean if necessary.
Gross weight 1003
lbs(455 Kg).
Net weight 937 lbs
(425 Kg).
fi g. 1 fi g. 2