COATS ProGuard Leverless Plus Tire Changer - Manual (Page 38)

Operation Manual - COATS PRO GUARD PLUS - 38
Observe the instructions that follow to ensure the perfect operation and lasting life of your tire changer:
- On a weekly basis, after cleaning thoroughly with vaporizing solvent, lubricate the guides of the bead loosening
carriage (1) and the guide of the Press Arm with chassis grease (2) (fi g. 40).
Keep all machine parts, in contact with the tire and/or wheel, clean.
- Make sure the transmission belt is tensioned correctly.
- On a periodic basis, check the oil level of the lubricator. Top-up if necessary by unscrewing the cup. Use just oil for
pneumatic systems in class ISO HG with viscosity ISO VG 32 such as the following types, for example: ESSO Febis
K32; MOBIL Vacouline Oil 1405; KLUBER Airpress 32
In particular, Hennssy Industries, Inc. is not liable for claims deriving from the use of non-original spare
parts or for damages caused through removal or tampering with safety systems.
25.2_Routine Maintenance
2
1
fi g. 40
Before making any inpection, adjustement, or repair, disconnect the power source and block out all moving
parts to prevent injury.