Det-Tronics EQ3750ASH EQP Addressable Smoke & Heat (ASH) Module - Manual

INSTRUCTIONS
Eagle Quantum Premier ® (EQP)
Addressable Smoke & Heat (ASH) Module
EQ3750ASH
4.2 © Detector Electronics Corporation 2012 Rev: 12/12 95-8654
Description
The Eagle Quantum Premier ® (EQP) Addressable
Smoke and Heat (ASH) Module is designed to expand
the input and output capability of Detector Electronics
Corporation’s (Det-Tronics ® ) EQP system.
The ASH is an interface device designed to provide
continuous and automated fire protection. It ensures
system operation through supervision of system inputs/
outputs and Local Operating Network/Signaling Line
Circuit (LON/SLC) monitoring in the Controller.
The ASH is located directly on the LON of the EQP system,
with a loop of up to 64 addressable devices tied into the
ASH. This allows the EQP Controller to annunciate a fire
alarm from either its own LON based I/O or from the ASH
connected addressable detection loops.
System status can be determined using the Eagle
Quantum Safety System Software (S 3 ), and the status
indicators on the module.
Features anD BeneFits
• Expands the capabilities of Det-Tronics’ Eagle
Quantum Premier system
• EQP Controller can support up to 10 ASH Modules
on a loop
Note
this support is dependant on system configuration
and logic within S
3 .
• Provides power and communications to 64
addressable devices
• Utilizes Apollo Discovery devices
• ASH Module alarm and fault conditions are logged in
the EQP Controller
• LEDs for easy annunciation of power, faults and
active devices on the loop
• Monitors single addressable devices
• Provides remote I/O capabilities via LON/SLC.
• DIN Rail or Panel mounting
• Plug-in wiring connectors
• RFI and EMI hardened
• Approved for use in Marine applications (Panel
mount only).