Manually starting or stopping a recording – Det-Tronics 000499-140 DVR, 4 Camera, 250GB (GE Security) User Manual
Page 35
Chapter 4: Basic operation
TruVision DVR 10 User Manual
31
Figure 13: Manual Record screen
The controls and options available on the Manual Record screen are described in
Table 10 below.
Table 11: Manual Record controls and options
Option Description
Camera
Lists the number of cameras the TVR 10 has.
Status
Camera work status has four values:
• Gray indicates the camera is idle.
• Green indicates the channel is recording (including real time recording,
alarm recording, motion detection recording).
• Red indicates network transmission.
• Orange indicates both recording and network transmission.
Start/Stop
The checkmark indicates you can start recording on the corresponding channel .
The X mark means you can stop recording.
Start All
Starts recording on all channels.
Stop All
Stops recording on all channels.
Manually starting or stopping a recording
This section describes how to manually start or stop a recording.
To manually start or stop a recording:
1. Right-click and then click Manual Record to display the Manual Record screen.
Alternatively, press the REC button on the front panel or remote control.
2. Enter your user name and password if requested.