Det-Tronics 000499-140 DVR, 4 Camera, 250GB (GE Security) - Manual (Page 77)

Chapter 5: Advanced setup
TruVision DVR 10 User Manual 73
Option Description
Port Specifies the network access port number. This value must be greater than
2000.
Mask Specifies the subnet mask. Default value is 255.255.255.0.
Gateway Specifies the gateway IP address. The gateway IP is used to communicate in
different network segments.
Http Port Specifies the port used for the Internet Explorer (IE) browser. The default value is
80. This value can be modified.
Advanced settings Specifies the advanced IP settings. See “Advanced IP settings” below for more
information.
Advanced IP settings
Table 20 below describes the advanced IP settings.
Table 20: Advanced IP settings
Option Description
Mac Specifies the physical address of the device. This value can not be
overwritten.
NIC type Specifies the NIC type. Default is 10M/100M Auto. Other options include:
10M Half-Dup, 10M Full-Dup, 100M Half-Dup and 100M Full-Dup.
IP server address Use this option if the TVR 10 is utilizing the PPPoE function, and retrieves
one dynamic IP address. If you define the DNS IP with one fixed Internet
IP address, the TVR 10 sends information such as TRV10 name, serial
number, and current IP address to that fixed IP address. The fixed IP
address is referred to as the DNS IP. The DNS server with that fixed
Internet IP address can receive the TVR 10 information and be used to
resolve the TRVR10 dynamic IP address. This IP server is a unique
software and does not fall into the normal domain name server. You
can use the SDK provided to develop this DNS software.
Multicast IP Specifies a D-class IP address between 224.0.0.0 to 239.255.255.255.
You do not need to specify this option if you are not using the multicast
function. Some routers prohibit the use of multicast function in case of
a network storm.
Remote Host IP and Port If an alarm and exception occur, the TVR 10 sends information to the
host IP you specify in this option. The site that has this IP can remotely
receive the alarm and exception information from the TVR 10.