Det-Tronics 000499-140 DVR, 4 Camera, 250GB (GE Security) - Manual (Page 65)

Chapter 5: Advanced setup
TruVision DVR 10 User Manual 61
Figure 21: Date & time screen
To configure the TVR 10 system date and time:
1. Select Display in the main menu to display the Display Configuration screen.
2. Click Date & Time Setup to display the Date & Time screen.
3. Specify a date format using the Date Display Mode list box.
The following are available formats:
• MM DD YY
• DD MM YY
• YY MM DD
4. Enter a date.
Click the Date edit box to enter into edit mode. Use the number buttons to enter a
date.
5. Enter the time.
Click the Time edit box to enter into edit mode. Use the number buttons to enter
the time.
6. Check Daylight Saving Time (if applicable).
Check the Enable DST check box to enable Daylight Saving Time. Select the
month, date and time when Daylight Savings starts and stops using the From and
To list boxes.
7. Click Confirm to save your changes.