Ptz settings, Ptz screen options, Ptz settings 76 – Det-Tronics 000499-140 DVR, 4 Camera, 250GB (GE Security) User Manual
Page 80
Chapter 5: Advanced setup
76
TruVision DVR 10 User Manual
PTZ settings
Use the PTZ screen, shown as Figure 30 below, to define PTZ functions for cameras
connected to your TVR 10. An RS-485 port is available at the TVR 10 back panel for
PTZ control. You can define RS-485 settings to match your PTZ protocol such as:
• PTZ parameters (including baud rate, data bits, stop bits, parity, and flow control)
• PTZ
protocol
• PTZ
address
• Preset
parameters
• Preset
tour
• Shadow
tour
To display the PTZ screen, click PTZ on the main menu.
Figure 30: PTZ screen
PTZ screen options
Table 21 below describes the PTZ screen options.
Table 21: PTZ screen options
Option Description
Select camera
Selects a PTZ camera.
PTZ parameters
Parameters include: baud rate, data bit, stop bit, parity, and flow
control. These parameters must be the same as the PTZ protocols.
PTZ address
Specifies the PTZ address. Each PTZ has a different address.