Det-Tronics 000499-140 DVR, 4 Camera, 250GB (GE Security) - Manual (Page 59)

Chapter 5: Advanced setup
TruVision DVR 10 User Manual 55
Figure 20: Video signal loss handle screen
To define a video loss alarm:
1. Display the Camera Configuration screen and select a camera.
2. Click Advanced Settings to display the Advanced Settings screen.
3. Click Video Loss option. The Rules option becomes active.
4. Define the video loss alarm schedule.
The system’s handling of a video loss alarm depends on the alarm schedule. In
the Rules screen, select the day of the week in the Alarm Schedule list box for
which you want to set the response time schedule. Enter the time period for the
response in the Period edit boxes. You can enter up to four time periods for each
day of the week.
5. Select a response method.
Check a response method for the system when a camera tamper alarm is
triggered. You can check one or more response methods, including:
Full Screen. Displays the alarm on the screen.
Buzzer. An audible alarm sounds.
Upload to Client. This feature is currently not supported.
Alarm Out. Triggers an alarm output. Up to four alarm outputs can be enabled.
Check the check box or use the Up or Down Arrow buttons and the ENTER button
to enable or disable these options.
6. Click Confirm on the Rules screen to save your setup.
Note: The TVR 10 will prompt you to reboot in order for the schedule to take
effect.