Bosch Divar -Digital Versatile Recorder User Manual
Page 17
Bosch Security Systems
Divar | Installation Manual | Quick install
EN | 2-5
>> RECORDING SETTINGS
>> DAY PERIOD
•
Fill in a start time and an end time to define the period during which the
day profile is active.
•
The weekend/night profile is active for the rest of the 24-hour period.
>> WEEKEND
•
When a day is defined as a weekend day, then the weekend/night profile
is active that whole day.
•
Define the weekend as either Saturday and Sunday or just Sunday.
•
Select none if you wish the weekend to be the same as the other days of
the week.
>> REC DAY
•
Select the normal recording speed to be used for each of the activated
cameras during the day profile.
•
The Images Per Second (IPS) rates available for PAL range from Never,
0, 1/10 (one image every 10 seconds), up to 25 IPS.
•
The Images Per Second (IPS) rates available for NTSC range from Never,
0, 1/10 (one image every 10 seconds), up to 30 IPS.
•
Set the recording speed to NEVER to not record a camera at all. No pre-
alarm recording is done and the camera cannot be viewed over the
network.
>> REC WEEKEND/NIGHT
•
Select the normal recording speed to be used for each of the activated
cameras during the weekend/night profile.
•
The Images Per Second (IPS) rates available for PAL range from Never,
0, 1/10 (one image every 10 seconds), up to 25 IPS.
•
The Images Per Second (IPS) rates available for NTSC range from Never,
0, 1/10 (one image every 10 seconds), up to 30 IPS.
•
Set the recording speed to NEVER to not record a camera at all. No pre-
alarm recording is done and the camera cannot be viewed over the
network.
>> ENABLE ALARM INPUTS FOR
•
Select the profiles during which alarm inputs are enabled.
•
Choose day only, weekend/night only, both day and weekend/night or
none.
>> ALARM INPUT RECORDING
•
An activated input alarm can increase the recording speed of a camera.
Select the recording speed to be used when an input is activated.
•
The camera with the number that corresponds to the alarm input
number is recorded at the speed you set.
>> ENABLE MOTION FOR
•
Select the profiles during which motion events are enabled Choose day,
weekend/night, both day and weekend/night or none.
•
Press the camera keys to select or deselect the cameras for which motion
should be enabled. A check mark means enabled.
>> MOTION RECORDING
•
A camera can be recorded at an increased recording speed when motion
is detected. Select the recording speed to be used for each of the cameras
when motion is detected.
RECORDING SETTINGS
DAY PERIOD
8:00 18:00
WEEKEND
SAT AND SUN
REC DAY
1 IPS/CAM
REC WEEKEND/NIGHT
2 IPS/CAM
ENABLE ALARM INPUTS FOR
DAY/NIGHT
ALARM INPUT RECORDING
12.5 IPS/INPUT
ENABLE MOTION FOR
NIGHT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
MOTION RECORDING
5 IPS/CAM
APPROX. REC. DURATION
036 HOURS