Configure menu, Network config, Version – ECOXGEAR ITCIR1000: Original Grace Internet Radio User Manual

Page 33

Advertising
background image

33

grace wireless internet radio

The Media Player allows you to play unprotected audio files (AAC, AIFF, MP3, RM, WAV,

WMA) and play lists (M3U) stored on a networked PC. It has been verified to work on

Windows 2000 and Windows XP.

CHOOSING THE OPTION YOU WANT FROM THE
CONFIGURE MENU

CONFIGURE MENU

1. Press the SELECT button.

(Note: if you make a mistake at any point, press the BACK button to go back to the

previous screen.)

2. Turn the knob until ‘Configure’ is displayed

3. Press the SELECT button.

4. Turn the knob until the display shows the option you want.

5. Press the SELECT button to choose the option shown on the display. The options are

explained below.

<Network Config>

Enables you to scan again for connection to another wireless network, or to manually

configure the network parameters. Use this if you take the Internet radio to another building

where you want to use it

<Version>

Use this option to download new firmware for the radio from the Reciva portal on the

Internet. If there is new firmware available, then the radio will prompt you if you want to

download it or not. Note, at this stage, you can press the radio’s BACK button to cancel

the radio beginning a firmware upgrade. A Firmware upgrade may take several minutes, so

do not switch off the power to the radio until the operation is complete otherwise the radio

may become permanently damaged.

Advertising