Sleep timer, Backlight – ECOXGEAR ITCIR1000: Original Grace Internet Radio User Manual

Page 35

Advertising
background image

35

grace wireless internet radio

<Sleep Timer>

Selecting this option will enable the Internet radio to switch itself off after a set period.

1. After selecting the ‘Sleep Timer’ menu item, the radio will display: ‘Sleep Timeout’

and the sleep timer value in the form ‘00:00:00’ (hours:minutes:seconds) in 30 second

increments.

2. Rotate the knob to change to sleep timer value and then press SELECT to begin the

sleep timer.

3. The radio will continue to play as normal, but it will go into standby mode after the sleep

timer has expired.

4. To turn the radio back on again, simply press the ON/OFF button.

<Backlight>

Selecting this option will alter the Internet radio’s backlight values.

1. After selecting the ‘Backlight’ menu item, the radio will display its list of three menu

modes: ‘Inactive’, ‘Active’ and ‘Standby’. These three states are explained below:

• The radio gets into its ‘inactive’ state when there is no user activity for 30 seconds.

• The ‘active’ state is when there is user activity.

• ‘Standby’ is the state when the radio has been turned off.

2. Rotate the knob to highlight the desired menu mode and press SELECT.

3. The radio will now display the current backlight value for this menu mode. You can alter

this value by rotating the knob to increase or decrease it.

Advertising