ECOXGEAR ITCIR1000: Original Grace Internet Radio - Manual (Page 34)

34 grace wireless internet radio
<Language>
Allows you to change the display language.
<Factory Reset>
Puts all the settings back to their defaults as they were when they left the factory. If you
perform a factory reset on your radio you will lose all your presets and your wireless network
connection.
<Register>
This will display a key that can be used to register the radio on the Reciva Customer portal:
http://www.reciva.com/
<Clock>
Use this option to set the time, to set an alarm and to view the current alarm setting, see
“Setting the alarm”.
<Upgrade Firmware>
Use this option to download new firmware for the radio from the Reciva portal on the
Internet. If there is new firmware available, then the radio will prompt you if you want to
download it or not. Note, at this stage, you can press the radio’s BACK button to cancel the
radio beginning a firmware upgrade. A Firmware upgrade may take several minutes, so do
not switch off the power to the radio until the operation is complete otherwise the radio
may become permanently damaged.