ECOXGEAR ITCIR1000: Original Grace Internet Radio - Manual (Page 5)

5 grace wireless internet radio
WHAT YOU NEED BEFORE YOU CAN USE YOUR
INTERNET RADIO
Before you can use your Internet radio, you need the following:
• A broadband Internet connection.
• A wireless access point (Wi-Fi) connected to your broadband Internet, preferably via a router.
• If your wireless network is configured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected
Access (WPA) data encryption then you need to know the WEP or WPA code so you can get the
Internet radio to communicate with the network.
• If your wireless network is configured for trusted stations you will need to enter the radio’s MAC
address into your wireless access point. To find the radio’s MAC address use menu items as
follows: Configure > Network Config > View Config > MAC Address
• To enter the MAC address into your wireless access point, you must read the instructions supplied
with the wireless access point.
The Internet radio should work anywhere within 300 feet (100 meters) of the wireless access point.
Before you continue, make sure that your wireless access point is powered up and connected to your
broadband Internet. To get this part of the system working you must read the instructions supplied
with the wireless access point.
INTERNET RADIO QUICKSTART GUIDE