ECOXGEAR IR2500: Innovator III - Manual (Page 20)

20
1. Press the select knob and you can create a new station by typing in a word.
2. After you type in the word, select (end) in the menu. After a few seconds it will show you artist, songs
and albums with names similar to the word you initially entered.
3. Choose desired selection. This function will also create a new station on your Pandora web site.
Changing the volume
When a radio station is playing increase the volume by turning the Volume Knob, clock wise.
Storing a radio station in a preset
Preset on Radio
When a station is playing, hold down one of the preset buttons (1-5) until the screen shows:
Assigned to
Preset #
* Where “#” is the number of the preset button you held down.
If you would like to program more than 5 preset i.e. 6-10. Press the shift key then press and hold the
corresponding preset button until the screen shows Assigned to Preset 6 etc.
All of your presets are saved in internal memory in the event of a power outage.
As a factory default ‘P1’ has a demo recording stored in the memory. To save a new station over the
demo recording simply follow the instructions above and your station will be saved over the demo
recording.
Additionally, the P1 button will also turn your radio on. It will not turn your radio off. Please use the
designated power button.
Storing a preset on the Remote Control
1. When a station is playing, press and hold one of the numbers (1-10) on the remote control.
2. Select a number to assign the station to (1-10).
* Please note presets 1-5 are the same for the remote & radio and can be stored using either the radio
or remote.