ECOXGEAR IR2500: Innovator III - Manual (Page 38)

38
Locating and playing media files using the radio and
UPnP
1. Once the UPnP server is configured to share media files with the Internet radio, you can play the files
by doing the following on the radio.
2. Keep pressing BACK to get to the radio’s top-level menu and then turn the knob to select ‘Media
Player’.
3. Press SELECT and then turn the knob to highlight ‘UPnP Servers’.
4. Press SELECT and the radio will scan for all available UPnP servers. Note, this may take a few
seconds for the radio to complete its scan and before the scan has completed, the radio will display
‘[Empty]’. The radio will continue to display ‘[Empty]’ if no UPnP servers are found.
5. After a successful scan, select your UPnP server, by rotating the knob if there is more than one UPnP
server, and then press SELECT.
6. The radio will now list the media categories available from the UPnP server, e.g. ‘Music’, ‘Playlists’
etc. Turn the knob to select which category you wish to browse, press SELECT and turn the knob to
highlight a sub category and press SELECT again. For example, you could select ‘Music’ and then
‘Album’.
7. Turn the knob to highlight the media files that you wish to play and press SELECT.