ECOXGEAR IR2500: Innovator III - Manual (Page 25)

25
8. After selecting < 1 Off 12:00 AM> you can choose the time to set the Alarm.
Set Alarm
12:00 AM
9. Turn the knob until the minute setting is correct, then press the ‘Select’ button.
Alarm Set:
07:45
10. Turn knob to choose how often you want the Alarm to alarm
11. Turn knob to use either the buzzer or the current radio station that is playing to turn on.
The display shows <Alarm Set> with the time of the alarm shown beneath for 3 seconds and then
returns to the radio station display.
When in Standby Mode, the Alarm time is shown next to the clock time with brackets.
1:58
Ensure the volume is set to the desired level before you turn the radio off.
NOTE: when your Alarm turns on, the radio’s back light display will turn on and show a menu asking if
you want to turn on the radio or not. If within 60 seconds after the display turns on your radio does not
connect to your Wi-Fi network and the radio station starts playing, the buzzer will announce instead. For
optimal performance choose a radio station that typically buffers very quickly.
Setting the sleep timer
1. Choose Alarm Clock
2. Choose Sleep Timer