ECOXGEAR IRCA700: Primo - Manual (Page 22)

22
Storing a radio station in a preset
Preset on Radio
When a station is playing, press and hold a preset button until the message below is displayed
(approximately 2 seconds). If you want to set presets 5-8 press the ‘Shift’ button briefly (the shift light in
the upper portion of the display will light up) then press and hold the preset button (approximately 2
seconds).
Preset on Remote Control
When a station is playing, press and hold one of the numbers (1-10) on the remote control until
‘assigned to preset #’ is displayed.
Please note presets 1-8 are the same for the remote & radio and can be stored using either the radio
or remote. There are an additional 2 presets on the remote.
Playing a preset radio station
When your radio is powered on and connected to your Wi-Fi network, press the preset button on the
radio to play a preset station. Note that from time to time radio stations change their internet location
(URL). If the preset no longer works go into the ‘Internet Radio’, ‘Search’ section of the radio. Type in
the call sign of the station you want to listen to and select that station. If it plays, then use this new
listing of the station to save over the current preset i.e. while the station is playing, press and hold the
preset for 1-2 seconds to override the previously saved station.
It is also possible to assign a Pandora station to a preset by pressing and holding the preset during
playback.
An example the ‘Assigned to
Preset…’ message.