ECOXGEAR IRCA700: Primo - Manual (Page 7)

7
QUICKSTART GUIDE - 1st time set up
What you need before you can use your Internet Radio:
 A broadband internet connection is required.
 A wireless (Wi-Fi) modem or router connected to your broadband (cable or DSL) internet.
NOTE: IF your wireless (Wi-Fi) network is password protected (WEP or WPA), please obtain your
password before proceeding to Step 1. All passwords are UPPER and lower case sensitive.
Step 1: Plug the round jack from the power cord into the back of the radio and the other end into a wall
outlet. When you plug the radio in the 1 st time it should automatically start scanning for your wi-fi
network in approximately 5-7 seconds. If it does not, please press the ‘Power’ button on the bottom right
of the front of the radio to turn it on. Then select the Settings menu
Turn the Menu knob on the front of the radio to the right until the ‘Settings’ icon is highlighted. Now
press the Menu knob inwards to select ‘settings’.
Home screen with the ‘Settings’ icon
highlighted