ECOXGEAR IRCA700: Primo - Manual (Page 46)

46
Now return to the radio and select UPnP Servers from the Media Player Menu and you should be
presented with a list of the available servers on your network, one of which should be the PC or laptop
that you have just configured.
To play content please select a device from the list and go through the menus on the radio to choose
content to play.
Select the name of the actual content to play it, or alternatively Press and Hold the Menu knob to add
the content to the media queue on the radio.
Playback can be paused by pressing the play/pause button, or select Forward or reverse to move
between songs or stop to halt playback.
USB Media
To play audio content from a USB memory device, insert the device into the USB socket in the rear of
the device. Select Media Player from the Home screen and then select USB Media. You will be
presented with a menu showing the contents of the memory device.
Simply select the name of the content to play it, or alternatively Press and Hold the Menu knob to add
the content to the media queue.
Playback can be paused by pressing the play/pause button. The other media buttons also work as you
would expect them to.
Please note Currently we only support drives formatted with FAT32 file system. FAT32 is limited to a
disk size of 2TB and a file size of 4GB. The maximum number of files supported is 268,435,437.
However, the radio is limited by its available memory and processor speed as you would expect of this
type of device. This means that the practical limit for the radio is much lower than the ultimate FAT32
limit.
Available memory varies depending on usage, and although the radio is equipped with an ARM 9
processor running at 266 MHz, the radio can be slow if there are very large numbers of files on the
drive.To avoid these limitation please access large media collections via a UPnP Media server.
Playback Mode
This menu item allows you select Shuffle and Repeat for the items in the play back queue. If you select
Shuffle or Repeat an appropriate icon will be shown at the top of the screen.
Queue
Select ‘Queue’ to view and clear the play back queue. ‘Clear Queue’ can be found at the end of the list
of content in the queue.