Elkhart Brass HEROPipe System Manual User Manual
Page 11
Advertising
11
5. Connect Hose and Rotate into Position
- With a strong forward momentum, manually drive the waterway forward using the pivot wheel until
resistance is felt, then pull down on the intake section to rotate it up into position until the second set
of black safety locks fall into place. Waterway MUST stay in direct contact with pivot wheel while
raising or lowering the waterway position.
- Insert the t-bar support into the locking channels on both sides, and then rotate-n-snap the lock-pins
down into place, securing the t-bar support into position.
6. Initiate Attack
- Start water flow by opening gate valve to begin fighting fire. This should be done as quickly as
possible to protect monitor.
Advertising