Elkhart Brass HEROPipe System Manual - Manual (Page 8)

8
I. Thermal Imaging Bracket
Quickly secure a thermal imaging camera to The
HEROPipe™ System by utilizing the snap-lock feature
of the Thermal Imaging Bracket. Simply lift and rotate
the clamp end of the Bracket 90° until it locks into
place. The Thermal Imaging Bracket mounts to the
discharge elbow of the Sidewinder™ EXM, which
allows thermal viewing in the direction of the stream.
Constructed from lightweight Elk-O-Lite aluminum, the
Thermal Imaging Bracket allows for rapid setup while
not weighing the system down. It stores stealthily on
the side of the monitor body when not in use. The
clamp jaw opening expands up to 1.5” when attaching a
thermal imaging camera.