Elkhart Brass UBEC 1C Valve Controller - Manual (Page 2)

2
PRODUCT SAFETY
Important:
Before installing and operating this equipment, read & study this manual
thoroughly. Proper installation is essential to safe operation. In addition, the following points
should be adhered to in order to ensure the safety of equipment and personnel:

All personnel who may be expected to operate this equipment must be thoroughly trained in its safe and
proper use.

Become thoroughly familiar with the hydraulic characteristics of this equipment.

Always open and close valves slowly to avoid water hammer.

After each use, and on a scheduled basis, inspect equipment per instructions in the maintenance section.

Keep fingers and hands clear of moving parts

Disconnect power before servicing any electric valve or electric valve controller

Use only mild dish soap & water to clean the controller

Any modifications to the electrical enclosure will destroy the NEMA 4 rating and void warranty
coverage of the enclosure and all components within.
CONTROLLER INFORMATION:
CONTROLLER SERIAL NUMBER: ______________________________
CONTROLLER DETAILS:
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________