Elkhart Brass UBEC 1C Valve Controller - Manual (Page 5)

5
Figure 4: Discharge Labels
II OVERVIEW
Designed with precision in mind, the electric valve controller and integrated LED display is easy to operate.
All controls and indicators are located on the front of the control and display module. Controls are simply
push buttons. UBEC 1C and UBEC 1S controllers are compatible with E3F and E5F electric actuators.
UBEC 1C

CAN enabled controller (J1939)

10 segment, absolute valve position feedback

Automatic valve position calibration

Open, close, and programmable preset buttons

Auto travel open and auto travel close

Programmable LED intensity control

Automatic adjusting day/night LED intensity

Datalink interface simplifies wiring between controller & valve

Large, positive tactile feedback snap buttons

Compact package size

Surface mount controller

Environmentally sealed
UBEC 1S

Direct wire connection to Unibody valve using E3F/E5F actuator

Full open, full close, and intermediate position feedback

Automatic valve position calibration

Open, close, and programmable preset buttons

Auto travel open and auto travel close

Large, positive tactile feedback snap buttons

Compact package size

Surface mount controller

Environmentally sealed
COLOR CODING

Color code up to 13 discharges per NFPA recommended colors

Clearly, quickly identifies discharges

Reflective labels that help identify in low light
Figure 2: UBEC 1C
Figure 3: UBEC 1S