Ethercat communication version, Ethercat in/ethernet pin assignments(j7), Ethercat in/ethernet pin assignments – ElmoMC Gold Line Digital Servo Drives-Gold DC Bell User Manual
Page 54
Gold DC Bell Installation Guide
MAN-G-DCBELIG-EC (Ver. 1.200)
||EtherCAT Communication Version
54
6.10. EtherCAT Communication Version
Fieldbus communications are industrial network protocols for real-time distributed control that
allows connection of servo drives. The Gold DC Bell supports the following EtherCAT fieldbus type
industrial network protocol:
Fieldbus Type
Product Number
EtherCAT
G-DCBELXX/YYY
E
XX
6.10.1. EtherCAT IN/Ethernet Pin Assignments(J7)
Refer to section 12.2 in the MAN-G-Panel Mounted Drives Hardware manual for more details.
Pin(J7)
Signal
Function
1
EtherCAT_IN_TX+/Ethernet_TX+
EtherCAT in/Ethernet transmit +
2
EtherCAT_IN_TX-/Ethernet_TX-
EtherCAT in/Ethernet transmit -
3
EtherCAT_IN_RX+/Ethernet_RX+
EtherCAT in/Ethernet receive +
4, 5
N/A
6
EtherCAT_IN_RX-/Ethernet_RX-
EtherCAT in/Ethernet receive -
7, 8
N/A
Pin Positions
Cable Connector
8-Pin RJ-45
Standard Ethernet CAT5 Cable
Table 11: EtherCAT In Pin Assignments