ElmoMC Gold Line Digital Servo Drives-Gold Drum Cable Kit RJ-45 connectors - Manual (Page 4)

Gold Drum Cable Kit
MAN-G-DRU-CBLKIT (Ver. 1.000)
www.elmomc.com
4
Chapter 1: Introduction
This document provides the wiring details for the cables used to connect Elmo's Gold Drum
servo drive with the end-user application. The servo drive-side pinouts are provided in the
Gold Drum Installation Guide.
The cables come in one length: 2 meters (6 ½ feet).
1.1. Cable Kit
The catalog number of the Gold Drum cable kit is CBL-GDCTROKIT.
NOTE:
It should be noted that this kit does not include any communication cables. Please purchase
these cables separately.
This cable kit includes the following cables:
ELMO Part Number Function
CBL-DFDBK Feedback Port A
CBL-GDCPORTB Feedback Port B
CBL-GDCPORTC Port C
CBL-GDCI/O I/O cable
CBL-CEL24 VL+ auxiliary supply
DRU-HVPOWKIT Power cable kit
In addition, standard cables that are not included in the cable kit are used to connect to the
EtherCAT In, EtherCAT Out and Mini-USB B-type connectors.
NOTE:
The CAN Terminator (ELMO Part Number ACC-TRM-01) must be separately requested when
the servo drive is located at the end point of the customer network. For details of the
operation of the CAN Terminator please refer to Chapter 8: .