Chapter 2: 24 vdc auxiliary supply, Chapter 2, 24 vdc auxiliary supply – ElmoMC Gold Line Digital Servo Drives-Gold Bassoon Cable Kit User Manual
Page 5
![background image](/manuals/558362/5/background.png)
Gold Bassoon Cable Kit (EtherCAT and CAN)
MAN-G-BAS-CBLKIT (Ver. 1.000)
5
Chapter 2:
24 VDC Auxiliary Supply
The 24 VDC logic cable is a single twisted-pair 24-AWG double-shielded cable. It is connected using
to the Gold Bassoon connector using an ending ferrule.
The cable is open on the end side so that it can be connected to the power supply.
The general pinout of the 24 VDC auxiliary supply is as follows:
Pin
No.
Signal
Color
Twisted &
Shielded Wire
VL+
+24VDC
Red
Pair
VL-
24VDC_RET
Black
Pin Positions
2/6-Pin Pluggable 3.5 mm Phoenix Screw Flange Connector
6-Pin Phoenix Plug-in
Connector
Table 1: Auxiliary Power Pin Assignments
Note:
The specific functionality of each pin is described fully in the Gold Bassoon Installation Guide.
Figure 1: 24 VDC Auxiliary Supply Cable